VVS-Varor

Connection hose with connectors straight-straight. Type approved for fixed installation. Nylon white.

Drain pipe with 1 sleeve and sealing ring, part of a complete system for indoor drainage in buildings. Made of recyclable and corrosion-free polypropylene with high resistance to heat and chemicals. Pipe class S14, which is the strongest class and thus withstands very high loads. Approved for embedding in wall, base plate and ground laying. A safe indoor drainage system that provides optimal security. Adapted to industry regulations Safe water installation. Tested and approved according to Nordic Poly Mark.

Drain pipe made of plastic, for indoor drains.

Indoor and outdoor weather, ozone and abrasion resistant PVC, reinforced with polyester yarn.
Application area: Suitable as drain hose for submersible pumps and other transport of water.
Temperature range: -20°C - +60°C.

Non-return valve for water, oil and compressed air. With internal thread. Max temperature +110ºC
Materials: Housing of hot-pressed brass, valve cone of reinforced nylon, spring and strainer of stainless steel.

Delivered in pairs.

Powerful self-priming 1-stage pressure pump for garden irrigation. The built-in Jet system sucks up water from wells, cisterns or rain barrels. Pump head in stainless steel. Mobile and compact. Brass components in the connection screws provide a stable connection option with standard G 1" threads. Easy installation.

Galv. Too swipe. Hole diameter 6.5 mm. SB-packaged.

Mixer bracket for external piping. With angle coupling. Chrome plated. Connection thread int. M26x1.5. Connection thread ext. G15. Connection dimensions 160 c/c.
Dimensions: 230 x 70 mm.

Stainless steel, polished mixer bracket for concealed piping. For Cu pipes. Connection thread M26x1.5. Connection dimensions 160 c/c. Supplied with plumbing screw.
Dimensions: 220 x 60 mm.

Efficient drill pump that is useful for most liquids, but not gasoline. Supplied with filter and bracket for bench mounting.
Max suction height: 2 m.
Max pressure capacity: 15 m.
Max capacity (at 3000 rpm): 30 l/min.
Shoulder tap: 7 mm.
Hose connection: 3/4".

Water pump with impact-resistant plastic housing. Operated with e.g. drilling machine. 1/2" hose.
Capacity: 2000 l/h
Pump height: 40 m
Suction height: 4 m

Pump for most liquids but not petrol. Capacity approx. 20 l/min at 2500 rpm. Withstands being run dry. Brass pump housing. Shaft and needle bearing in stainless steel (AISI 304). Connection shaft for drilling machine 8 mm.
Suction height: max 1.5 m.
Hose connection: 21 mm inner diameter of the hose.

Drill pump intended for water, light liquids or non-flammable liquids. With 1/2" quick coupling bracket and drive shaft Ø 6 mm. Pumps 900 l/hour at 2000 rpm. Must not be used together with flammable liquids such as brake fluid, gasoline or corrosive substances, etc.

For pumping water. For villa and garden. Self-sucking. Operated with e.g. drill.
2202000: Connecting shaft 6 mm. Hose connection 13 mm (1/2").
2207000: Connection shaft 8 mm. Threaded hose connection 19 mm (3/4").

Mounted in box with hole Ø 48-55 mm. Fits drawer in Gustavsberg, Ramnäs and Franke standard benches. External thread 1 1/2". Supplied complete with strainer, plug and gasket.

Mounted in funnel with hole Ø 48-55 mm. Fits well in Gustavsberg, Ramnäs and Franke standard benches. External thread 1 1/2" G40.

Strainer valve with lifting plug. Metal top and bottom. Chrome plated.

Spring-loaded herbivorous cone. Holds tightly in all positions standing, lying down and tilted. With internal thread.
Materials: Body of hot-pressed brass, valve cone of reinforced nylon, spring and strainer of stainless steel.

Bottom valve with plug G32 (G 1 1/4") with overflow for wash basin. Polished chrome-plated with smooth strainer top. White plastic bottom. Dimensions 25-65 mm.

Bottom valve for bathtub.
Length: 150 mm
Width: 200 mm
Height: 20 mm

External/internal thread.

Sink insert that provides a tight and smooth cabinet bottom. Placed directly on the bottom of the kitchen cabinet, and can be adapted to different widths in both new and existing cabinets. If it is used in cabinets with water lines and pipe penetrations, a tight surface layer is created with the addition of sealing kit and Diaflex/hose penetration.

Bench cabinet insert that is placed directly on the bottom of a bench cabinet and provides a tight and smooth bottom that is easy to keep clean. Collects and directs water leakage. Sealing layer of Polypropylene plastic with punched lines and waterproof tape. In cabinets with water lines and pipe penetrations, a tight surface layer is created with the help of Tollco Sealing set with Diaflex and grommets (Tollco art no. 5902010-04-001, RSK no. 3839289) alternatively Sealing set no. 3 Butyl tape HQB mix (Tollco art no. 590030, RSK no. 3829933) and Diaflex hose feedthrough (Tollco art no. 590042, RSK no. 8039030).

Cistern lid with pressure device. White. For WC models in the 390 series Nordic.

Rubber sink stopper that fits recessed strainer.

Smooth and flexible hose passage. Mounted in sink cabinets where hoses and cables from the dishwasher enter. It will be a neat, clean installation of the hoses in the cabinet. The Diaflex holds the hoses so they don't rub against each other. T80 socket drill is used to make holes in the cabinet bottom.

Dishwasher mat that is placed under the dishwasher. The hidden floor surface is protected. Any water leakage is led forward to become visible. The disc is made of impact-resistant PP plastic. The product has been tested and approved according to type approval 0505/01. The product is accepted in the Construction Product Assessment.

Oppvaskmaskinunderlag som plasseres under oppvaskmaskinen for å forebygge vannskader. Eventuelle vannlekkasjer ledes frem og blir synlige. Kan samle opp og holde på mer enn 2 liter vann. Laget av slagfast PP-plast.

Connection angle for countertop dishwasher. Fits single-lever faucets with built-in dishwasher shut-off in the 9000 series as well as the 9000E series, 8003 and 8004 models. (Not for faucets with side shower). Connection G1/2.

Used as a drainage pump or when emptying dirty water from foundations and during floods. For demanding tasks.
Cable length: 10 m.

Powerful dirty water pump. Stable and robust construction with several gaskets and the use of corrosion-free material ensure a long service life. Equipped with a float for automatic connection and disconnection, a 90° angle connection and combi nipple for all common hose sizes. 
Cable length: 10 m.

Powerful dirty water pump. Stable and robust construction with several gaskets and the use of corrosion-free material provide a long service life. Equipped with a float for automatic on and off, a 90° angle connection and combi nipple for all common hose sizes.
Cable length: 10 m.

Submersible sewage pump. Long service life with maintenance-free motor, specially treated motor shafts in stainless Inox steel and fiberglass-reinforced polypropylene housing. Universal angle connection with a freely swiveling 90° angle connection to prevent the water hose from kinking. With combi nipple that fits different hose sizes. Thanks to the large suction opening, even water with liquid particles up to 30 mm is pumped in an even flow.
Cable length: 10 m.

Suitable for clean and slightly polluted water. Ideal for draining or bilge pumping of flooded basements, swimming pools, water cisterns, etc. Suitable for tight spaces thanks to the built-in float. Can be set between automatic operation and manual constant operation.
Cable length: 10 m.

Submersible pump for clean water with surface suction function. The universal connection nozzle that fits most hose sizes. Robust, handy and powerful entry-level model. Suitable for pumping out pools, cisterns, wells or flooded basements.
Cable length: 10 m.

Multifunctional, submersible pump for both dirty water and clear water. Easy to adjust the pump foot to change from operation with dirty water to operation with clear water. Optimum corrosion protection and stainless steel construction provide a long service life. Patented combi impeller for extreme demands. Integrated float. 
Cable length: 10 m.

Powerful, submersible pump that sucks up clean and dirty water with dirt particles of up to 20 mm. Pump capacity of up to 16,000 l/h. Suitable, among other things, for pumping water out of a garden pond or for use in flooded areas. Equipped with a float switch that automatically turns the pump on and off depending on the water level and can be adjusted in height using a level rocker. Switch for automatic or manual operation. Pumps out down to a depth of 25 mm in manual operation. Quick Connect connection thread for quick and easy connection of 1", 1 1/4" and 1 1/2" hoses. Ceramic slip ring seal. Robust pre-filter available as an option (not included) to protect the impeller in case of larger dirt particles. Comfortable lifting handle .

Powerful, submersible pump with 2-in-1 function that sucks up clean and dirty water with dirt particles of up to 20 mm. Pump capacity of up to 16,000 l/h. Suitable, among other things, for pumping water out of a garden pond, use in flooded areas, water damage in houses or basements or for pumping clean the pool. Equipped with a float switch that automatically turns the pump on and off depending on the water level and can be adjusted in height using the level rocker. Adjustable filter basket that can be quickly and easily adjusted from suction of dirty water to suction of water down to 1 mm. Switch for automatic or manual operation. Quick Connect connection thread for quick and easy connection of 1", 1 1/4" and 1 1/2" hoses or a G1 connection. Ceramic slip ring seal. Comfortable lifting handle.